Paint, Lead-based

Lead-based Paint Removal 
Mechanical Operations 
Mechanical paint removal operations (such as sanding, scraping, using a needlegun, or blasting) create dust, paint chips, and spent grit. These methods are not recommended for lead-based paint. Paint chips, dust, and spent grit require a clearance before they can be put in the dumpster or at a municipal landfill. Call your county or city health department for authorization and testing information. 

Chemical Stripping 
Waste from chemical paint stripping should be handled as dangerous waste. Use a 
licensed waste management company. 

Hydroblasting and Pressure Washing 
Never discharge water from hydroblasting or pressure washing painted surfaces to the ground, the storm drainage system, ditches, into septic systems, or to local creeks, rivers, lakes, or Puget Sound. Never discharge anything other than uncontaminated rainwater into these systems. You need to collect the wastewater and paint chips. 

When starting your hydroblasting or pressure washing job, start with a test portion first. Set up tarps, booms, sump pumps or other means to collect all the wastewater from the test. Sample the water, and have a lab analyze it for total metals. Submit the test results to your local sewer or utility district. 

If the test results are within local limits, you may receive a discharge authorization to dispose of the wastewater to the sanitary sewer. The wastewater will need to be collected and separated from the paint chips (see paint chip disposal guidance above). 

If the total metal levels are too high for sanitary sewer discharge, the collected wastewater may be treated to meet the limits (dispose of sludge as dangerous waste). You may prefer to have a licensed waste management company dispose of it.